New PROCOM PRO-DIPX 80/88 50W Diplexer Available for the 0 - 80 MHz and 88 – 960 MHz Ranges
If you are looking to combine or split both 0 - 80 MHz and 88 - 960 MHz frequencies on your radio systems then the PRO-DIPX 80/88 may be the diplexer you are looking for. Featuring a Chebychev filter design, this new PROCOM diplexer ensures very high isolation across the entire pass ranges along with very low insertion loss.
The PRO-DIPX 80/88 makes it possible to use only one antenna for the operation of two transceivers (one in each range). The antenna must be a dual-frequency antenna, i.e. it must be resonant on the actual frequencies in the two bands.
The transceivers may be used independently and will have no degrading influence on each other. Typically, the diplexer is installed next to the transceivers and only one cable is used between the diplexer and the antenna. The diplexer is suitable both for base station and mobile use.
The main tasks of the diplexer are to protect the individual receiver input from damage by the transceiver in the contrary band and to ensure a low-loss path between the transceiver and the antenna which is not influenced by the other branch.
The diplexer can be operated together with any set of transceivers operating within the 0 - 80 MHz and 88 - 960 MHz frequency bands. It is available with N, SMA, TNC or BNC female connector types.
The light weight, aluminium milled box ensures extraordinarily high mechanical strength. PRO-DIPX 80/88 is coated with black vinyl to prevent corrosion.
For more information about this product, download the PDF brochure below. Alternatively, give our team a call on 01227 743099 or email@example.com
Download PROCOM PRO-DIPX 80/88 brochure